The continuous press type BPN is designed to press the joints of cloth and paper narrow belts. The BPN machine is indicated for converters with medium-low productions.

Technical Data

  • Jointing and pressing in one operation
  • Actual pressure on abrasive is about 1.2 daN/mm2 (comparable to a conventional roller press or to a standard beam press)
  • The abrasive belt is aligned and pressed through a transport belt (standard belt with low purchase cost) which is pressing on the grain side and ensures the good quality of the pressing process; machine allows a fast belt change
  • Maximum joint length 450 mm
  • Minimum belt length 280 mm with a 90° joint
  • The lower pressing bar is provided with a vacuum system for an easier jointing operation and is heated up to 80 °C with thermoregulator

Size and Power

  • Overall machine dimensions: 1.4 x 1.0 x 1.8 m
  • Approx. weight: 250 kg
  • Installed power: 2 kW
  • Air consumption: 15 l/cycle